Fire Alarm Siren

• EN 54-2 and EN 54-4 certified.
• Conventional fire panel.
• Compatible with all manufactured conventional detectors.
• Fire lines 2, 4, 6 or 8.
• Outputs – 12, 16 or 20 relay-type embedded.
• Control lines and monitoring outputs for fault conditions (short circuit and interruption) and automatic reset.
• Light and textual indication for Fire condition, Fault, Prohibition and Test.
• Ability to delay controllable outputs and general fire for a period of 10 to 600 seconds after the state registration of fire.
• Built-in sounder for fire – one tonal, continuous with the possibility of exclusion; Status Test each fire alarm lines.

Inputs Specifications:

• L1 and L2– Conventional
• Zones for extinguishing
• L3 Conventional Zone for Fire Alarm
• Low Press. input – supervised balanced input
• Manual release input – supervised balanced inputOutputs Specifications:
  • S 1 (Sounder 1) – Monitored, 24V DC, 500mA
  • S 2 (Sounder 2) – Monitored, 24V DC, 500mA
  • Rel 1ST Stage 1 relay “Fire Alarm” (NC, COM, NO), 5-30V DC/1A
  • Rel 2ST Stage 2 relay “Extinguishing Activated” (NC, COM, NO), 5-30V DC/1A
  • Fault relay(NC, COM, NO), 5-30V DC/1A

• Plastic box;
• Input voltage (187-253)V AC, 50Hz.
• Output voltage (18-27.6)V/DC.
• Output current (in the presence of main power supply) – up to 2.0A (continuous).
• Output current (in absence of mains power supply and fully charged back-up battery) – 3.5A up to 1h.
• Back-up battery – 2x12V / 5Ah.
• 5 Led indicators.
• Developed under the requirements of EN 54-4.